Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
6003ZZ (I.D.=17mm, O.D.=35mm, Thickness=10mm); 6003ZZ bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
MR128ZZ Miniature Shielded Bearing 8mm x 12mm x 3.5mm, the inner diameter is 8mm, outer diameter is 12mm and the width is 3.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
4219328 bearings are used in the Excavator Final drive system of Hitachi ：
4219328 BRG.;ROL. Hitachi parts EX700, EX750-5, EX800H-5, ZR900TS, ZX1000K-3, ZX800, ZX850-3, ZX850-3F, ZX850H, ZX850LC-3-DH, ZX870-5G, ZX870H-3, ZX870H-3-HCMC, ZX870H-3F, ZX870H-5G, ZX870LC-5B, ZX870LC-5G, ZX870LCH-5G, ZX870LCR-5G
6302-2RS (I.D.=15mm, O.D.=42mm, Thickness=13mm); 6302-2RS bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal: suffix Z, RS, RU or TS. TTS is used smaller ball, load rating is lower than standard.
6002-2RS (I.D.=15mm, O.D.=32mm, Thickness=9mm); 6002-2RS bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
MF95ZZ bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 5mm inner diameter, a 9mm outer diameter, a 3mm thickness, and an 10.2mm flange.
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal: suffix Z, RS, RU or TS. TTS is used smaller ball, load rating is lower than standard.
150-0909 bearings are used in the reduction gearbox system of Caterpillar heavy machinery equipment：
1500909 BEARING Caterpillar parts fit:303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E
6203-2RS (17x40x12mm) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.
