Surface mount wire to board connector support the connection of wires to a printed circuit board (PCB). There are 1 pin, 2 pin & 3 pin for your choose, it's easy to install.
One Of The Commonly Used Connectors In Photovoltaic Systems, It Is
Mainly Used For Quick-Plug Wiring Inside And Outside The Photovoltaic Power
Distribution Box, And Can Work Under 1.5KV Voltage
MC4 Y Branch Connectors are 2 to 1 connectors that allow for a safe and simple parallel or serial-parallel connection of PV modules. Available in either 2 female to 1 male, or 2 male to 1 female, and pluggable with single-pole MC4 connectors
222-21M Mini Lever Crimp Connector It is a new product with smaller volume and more compact use space, and is suitable for continuation and branching of household wires. It is easy to use, easy to carry and safe.
One pair of 3 Input 1 Out T-Branch Connectors for solar panels.Waterproof Grade IP67, Can Be Used Outdoors, With A Buckle Design, It Is Not Easy To Fall Off By Itself During Work.
The Newly Designed Lever Crimp Connector Of The Internal Structure Can Be Spliced In Multiple Positions. A Single Product Can Have 1-In, 1-Out And 1-In And Multiple-Out Structures At The Same Time, And Can Be Used With Rail Brackets.
XT30U connector, its housing is made with PA and the contact is gold plated, its shape prevents reverse polarity, and when plugged in the connection is super-solid. Advantages: low resistance, slow heating, anti-reverse insertion
M5 circular connector is specially developed for the miniature sensor market and any application that requires multiple sensors within a very small area
SPL-5 lever nuts connectors are subverting traditional wiring methods, make the wiring quick and safe, they are widely used in home appliances, building wiring and machinery wire connecting parts
There Are 2 To1, 3to1 And 4to1 Options For The Branched Solar Connector With Cable. The Male And Female Are Used Together, Which Can Realize Parallel Or Series-Parallel Connection Of Photovoltaic Modules.
Panel-Mounted PV Bulkhead Connectors Are Mainly Used In The Internal And
External Wiring Of The Photovoltaic Junction Box. Use Bulkhead Solar Connectors For Coupling And Wiring, Which Is More Convenient To Connect And Disconnect The
Circuit Of The Junction Box.
The Lever-Type Plug-In Terminal Block Has A New
Internal Design, The Lever Handle Has No Resistance To Open And Close, And The
Wiring Is More Labor-Saving; The Splicable Structure, The Number Of Digits Can
Be Spliced Infinitely; No Male-Female Design, Which Can Reduce The Procurement
Specifications; The Wiring Is More Convenient, And The Plug-In Fast.
