Waterproof anderson connectors provide quick disconnect for power distribution systems in mobile and industrial equipment. They are commonly used in battery or charging applications, and they are available in four sizes of 50A, 120A, 175A and 350A. It provides simplified assembly and minimize the number of components.
The straight waterproof connector uses a 6-10mm diameter cable, can connect to a conductor of ≤14AWG or 2.5mm2, and is crimped with a terminal screw, which can withstand a maximum current of 20A, and has a wide range of applications.
The EVO2 MC4 Connector Can Support Wires Of <10AWG (6mm2) And Has A Rated Withstand Voltage Of 1500V. It Is The Most Used Connector In Photovoltaic Systems. Can Be Made Into Cable Assemblies As Required.
The size of mini waterproof connector is equivalent to AA size 5 battery. It's easy to operate, can be used under water depth 4m. There are 2 pin and 3 pin.
We provide a wide variety of battery connectors, as well as other electrical connector accessories, including battery terminal covers, battery cables/wires, etc.
T Type Waterproof Connector Use 6-10mm diameter cable, wire size ≤14AWG (2.5mm2), screw crimping; the maximum current can support 16A. There are 3 independent wiring devices. Compared with other T-type or Y-type connectors with only one wiring device, the wiring is faster, the operation is simpler, and the contact is more reliable.
Ethernet coupling connector is simply disassembled and assembled by locking the tail nut, so that the connector and the cable form a perfect fit, not easy to fall off, and its waterproof effect can achieve to IP67
