Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
NTN 6203 deep groove ball bearing with size 17 mm ID x 40 mm OD x 12 mm, with double red seals. 6302 bearing have a groove on the outside and the inside of the bearing. It is inseparable and it mainly take radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed and large size range.
reducing your rolling mill cost;
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
Angular contact bearing SF4019PX1(200*260*30) is used in excavator travel gearbox.
ZHZB Excavator Bearing Factory Supplier Provides High Quality SF4019PX1
CS Ball joint metric size
Material:
Body: Low carbon steel.
Ball stud: Carbon steel, Ball is induction hardened.
Inner retaining ring and safety clip: Hard drawn spring steel.
Protective Finish:
Ball joint components zinc plated and clear passivated, Ball stud.
Inner retaining ring and safety clip are de-embrittled.
Features
Ball stud is retained by a captive internal wire ring.
Additional stud retention security is provided by the external wire safety clip.
For improved wear resistance, the ball is induction hardened.
Optional polychloroprene gaiter available to help resist dirt ingress.
If a fitted gaiter is required, please add G to the part number e.g. CSG 8/1.
Hexagon form on body.
Spanner flats are not available on CS 12/1 and 16/1.
Burnished ball for smoother operation.
