Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite)
The light slewing bearing is one typical model and it is widely used in food machinery, canning packing machinery and environmental machinery. Its structure is identical with four point contact ball slewing bearing, but the weight is relatively lighter.
higher rolling efficiency with inner rings remained onto
the rolls during processing;
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
radial clearance is
generally executed in C3 or C4;
four-row cylindrical roller bearings for
steel industry
stabilizing treatment allowing the
bearings to work with temperatures up to 150° C, without dimensional
change and distortion
particularly suitable for high-speed
rolling mills
OEM service
contact us for bearing stock list
6202ZZ high temperature bearings mainly refer to the common bearing structure, using high temperature resistant materials, such as high temperature grease; and the bearing clearance is much larger than ordinary bearings , so it is usually not suitable for high speed operation, it is a high temperature low speed bearing. High temperature bearings are widely used in high temperature operation machinery such as metallurgy, kiln, glass, blast furnace, painting equipment.
NTN 6204 deep groove ball bearing with size 20 mm ID x 47 mm OD x 14 mm, with double red seals. 6204 bearing have a groove on the outside and the inside of the bearing. It is inseparable and it mainly take radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed and large size range.
Angular contact bearing SF3215PX1(160*200*20) is used in excavator travel gearbox.
ZHZB Excavator Bearing Factory Supplier Provides High Quality SF3215PX1
6302 full silicon nitride balls ceramic bearing with size 15*42*13mm ,this bearing are produce with full balls without any cage and with material ceramic ZrO2 and PTFE cage,which can working at temperature at 600 degree .
