Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
higher working performance and low cost to help the steel
mills reduce their rolling mill cost;
6202ZZ high temperature bearings mainly refer to the common bearing structure, using high temperature resistant materials, such as high temperature grease; and the bearing clearance is much larger than ordinary bearings , so it is usually not suitable for high speed operation, it is a high temperature low speed bearing. High temperature bearings are widely used in high temperature operation machinery such as metallurgy, kiln, glass, blast furnace, painting equipment.
UCFS300 Heavy duty,Pilot on the back of housing,Wider inner ring bearing,Setscrew locking,Cast gray iron housing .
Cast ductile iron housing available upon request.
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
radial clearance is
generally executed in C3 or C4;
stock available;
The double row ball slewing bearing has three seat rings. The steel ball and isolation block can be directly discharged into the upper and lower raceways. It is especially suitable for tower crane, truck crane and other loading and unloading machinery requiring medium or above diameter.
70 mm Bore, 160 mm OD, 68.3 mm Width,GW315PPB11 bearing are with round bore ,and the material are with Chrome steel ,we can provide sample for you to test before order .
Angular contact bearing SF6015PX1(300*372*36) is used in excavator travel gearbox.
ZHZB Excavator Bearing Factory Supplier Provides High Quality SF6015PX1
professional manufacturer of bearings for steel mills
of billets, bars, sections, angles, beams, wire rods, coils, etc.
P6 precision for higher wear-resistance
best bearing steel to ensure the bearing can work
under highest loads
radial
clearance is generally executed in C3 or C4
ready stock available
