Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
4224213 bearings are used in the Excavator Final drive system of Hitachi ：
4224213 BRG.;ROL. Hitachi parts CX1000, CX1100, CX1800, CX900, EX1100, EX1100-3, EX1200-5, EX1200-5C, EX1200-5D, EX1200-6, EX800H-5, HR1200SG, KH850-3, TL1100-3, ZX1800K-3, ZX800, ZX850-3, ZX850H
The light slewing bearing mounting surface must meet the specified flatness and hardness. For special customized requirements, please contact my engineer. At the same time, we will provide a more comprehensive and targeted solution.
4236786 bearings are used in the Excavator Final drive system of Hitachi ：
4236786 BRG.;ROL. Hitachi parts CX1000, CX1100, CX1800, CX900, EX1100, EX1100-3, EX1200-5, EX1200-5C, EX1200-5D, EX1200-6, EX800H-5, HR1200SG, KH850-3, TL1100-3, ZX1800K-3, ZX800, ZX850-3, ZX850H
25Z494D11 bearings are used in the Excavator Slewing Gearbox Bearing system of KOBELCO heavy machinery equipment：
25Z494D11 BEARING Kobelco parts SK200LC K907 K907D K907DLC K907LC MD200BLC MD200C SK150LC SK160LC SK200 ED180 SK210 SK210LC
4246793 bearings are used in the Excavator Final drive system of Hitachi ：
4246793 BRG.;ROL. Hitachi parts CHR70, CX350DR, CX500, CX500DR, CX500PD, CX550, CX700, CX700 JPN, EX200-2, EX200-3, EX200-3C, EX200-3E, EX200-5, EX200-5 JPN, EX200-5HG, EX200-5HHE, EX200-5LV JAP, EX200-5X JPN, EX200-5Z
K9007403 bearings are used in the final drive bearing system of Doosan Heavy Machinery Equipment:
K9007403 BEARING;ANGULAR BALL Doosan parts：DX200A，DX210 / DX225LCB，DX220A / DX225LCA，DX220AF，DX225LC-3，DX225LC-3，DX225LC-5，DX230LC，DX235LC-5，DX235LCR-5，DX255LC-3，DX255LC-3，DX260LCA
insensitive
to misalignment of the shaft relative to the housing;
automatically corrected to
reduce excessive force to bearings;
suitable for low- or
medium-speed applications involving heavy or impact loading;
Proper amount of lubricant is not required to be cleaned before installation, and lubricant is not required to be added. When the jacking screw on the protruding end of the bearing inner ring is fastened on the shaft, the allowable axial load shall not exceed 20% of the rated dynamic load.
6007ZZ (I.D.=35mm, O.D.=62mm, Thickness=14mm); 6007ZZ bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
