Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
MF95-2RS bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 5mm inner diameter, a 9mm outer diameter, a 3mm thickness, and an 10.2mm flange.
MF117ZZ bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 7mm inner diameter, a 11mm outer diameter, a 3mm thickness, and an 12.2mm flange.
4246793 bearings are used in the Excavator Final drive system of Hitachi ：
4246793 BRG.;ROL. Hitachi parts CHR70, CX350DR, CX500, CX500DR, CX500PD, CX550, CX700, CX700 JPN, EX200-2, EX200-3, EX200-3C, EX200-3E, EX200-5, EX200-5 JPN, EX200-5HG, EX200-5HHE, EX200-5LV JAP, EX200-5X JPN, EX200-5Z
MR148ZZ Miniature Shielded Bearing 8mm x 14mm x 4mm, the inner diameter is 8mm, outer diameter is 14mm and the width is 4mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
Doosan excavator final drive bearing 2109-9043
2109-9043 ANGULAR BEARING Doosan parts fit：SOLAR 280LC-III , SOLAR 290LC-V , SOLAR 290LL , SOLAR 300LC-V.
MF85ZZ bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 5mm inner diameter, a 8mm outer diameter, a 2.5mm thickness, and an 9.2mm flange.
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal: suffix Z, RS, RU or TS. TTS is used smaller ball, load rating is lower than standard.
150-0909 bearings are used in the reduction gearbox system of Caterpillar heavy machinery equipment：
1500909 BEARING Caterpillar parts fit:303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E
Silicon Carbide Full Complement Ball Bearing offers the best heat and corrosion resistance of all the ceramic materials.
Silicon Carbide is best used under low loads and in highly corrosive environments.
and with full complement types, silicon carbide bearing can be used up to 1200°C working tempearture.
4321887 bearings are used in the Excavator Final drive system of Hitachi ：
4321887 BRG.;ROL. Hitachi parts CHR70, EX100-2, EX100-3, EX100-3C, EX100-5, EX100-5 JPN, EX100M-5, EX120-2, EX120-3, EX120-3C, EX120-5, EX120-5 JPN, EX120-5HG, EX120-5LV JPN, EX120-5X, EX120-5Z, EX120K-2, EX120K-3, EX120SS-5, EX130H
