The Newly Designed Lever Crimp Connector Of The Internal Structure Can Be Spliced In Multiple Positions. A Single Product Can Have 1-In, 1-Out And 1-In And Multiple-Out Structures At The Same Time, And Can Be Used With Rail Brackets.
One pair of 3 Input 1 Out T-Branch Connectors for solar panels.Waterproof Grade IP67, Can Be Used Outdoors, With A Buckle Design, It Is Not Easy To Fall Off By Itself During Work.
SPL-5 lever nuts connectors are subverting traditional wiring methods, make the wiring quick and safe, they are widely used in home appliances, building wiring and machinery wire connecting parts
XT30U connector, its housing is made with PA and the contact is gold plated, its shape prevents reverse polarity, and when plugged in the connection is super-solid. Advantages: low resistance, slow heating, anti-reverse insertion
M5 circular connector is specially developed for the miniature sensor market and any application that requires multiple sensors within a very small area
The Lever-Type Plug-In Terminal Block Has A New
Internal Design, The Lever Handle Has No Resistance To Open And Close, And The
Wiring Is More Labor-Saving; The Splicable Structure, The Number Of Digits Can
Be Spliced Infinitely; No Male-Female Design, Which Can Reduce The Procurement
Specifications; The Wiring Is More Convenient, And The Plug-In Fast.
Din rail connector: PCT-211 can replace uk series, screwless design. There are accessories- metal bar, rubber button and screws, can be use with the connector make it into multi-pole.
There Are 2 To1, 3to1 And 4to1 Options For The Branched Solar Connector With Cable. The Male And Female Are Used Together, Which Can Realize Parallel Or Series-Parallel Connection Of Photovoltaic Modules.
Panel-Mounted PV Bulkhead Connectors Are Mainly Used In The Internal And
External Wiring Of The Photovoltaic Junction Box. Use Bulkhead Solar Connectors For Coupling And Wiring, Which Is More Convenient To Connect And Disconnect The
Circuit Of The Junction Box.
There is no need to strip the quick wire branch connector, the main wire does not need to be stripped when using, and the handle is used for quick crimping when the branch is connected.
The Lever-Type Non-Screw Terminal Block Can Withstand 250V32A Power, The
Spacing Is 5mm, And The DIP Type Is Welded On The PCB Board, Which Is Very
Suitable For Use In Switching Power Supply And Other Wiring Devices That
Require High Current And High Power Input And Output.
Our flexible and reliable smd wire to board connectors are designed for small size mating and safe termination, and support the connection of wires to a printed circuit board (PCB).
MC4 Branch Connectors are 2 to 1 connectors that allow for a safe and simple parallel or serial-parallel connection of PV modules. Available in either 2 female to 1 male, or 2 male to 1 female, and pluggable with single-pole MC4 connectors
It is an important mobile tool for home rehabilitation, turnover transportation, medical treatment, and outing activities of the wounded, sick, and handicapped. The wheelchair not only meets the mobility of the physically handicapped and the mobility impaired
This momentary button switch is rugged and easy to install it! Simply drill a 19mm hole into any material and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure.
