Roller bearings are used in all main shaft and auxiliary drive shaft applications to support pure radial load, and allow for axial shaft elongation due to temperature changes with no additional load effect on the bearing.
professional manufacturer of bearings for
steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc.
P6 precision for higher wear-resistance
best bearing steel to ensure the bearing
can work under highest loads
radial clearance is generally executed in
C3 or C4
ready stock available
VW series roller bearing according to difference of seal type can be divided into iron cover seal (no suffix, such as: W4) and rubber cover seal (name of X suffix, such as: W4X) two kinds
If using stainless steel material, the name will be the words with the SS, such as: W4SSX
professional manufacturer of bearings for steel mills
of billets, bars, sections, angles, beams, wire rods, coils, etc.
P6 precision for higher wear-resistance
best bearing steel to ensure the bearing can work
under highest loads
radial
clearance is generally executed in C3 or C4
ready stock available
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
higher working performance and low cost to help the steel
mills reduce their rolling mill cost;
Double-row cylindrical roller bearing allowing greater radial load;
higher rolling efficiency with inner rings remained onto
the rolls during processing;
