Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
MR137ZZ Miniature Shielded Bearing 7mm x 13mm x 4mm, the inner diameter is 7mm, outer diameter is 13mm and the width is 4mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
6003-2RS (I.D.=17mm, O.D.=35mm, Thickness=10mm); 6003-2RS bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
6204-2RS (20x47x14mm) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.
196-4873 bearings are used in the reduction gearbox system of Caterpillar heavy machinery equipment：
1964873 BEARING AS-BALL Caterpillar parts fit:325C LCR, 330C L, 330D, 328D L
4192975 bearings are used in the Excavator Final drive system of Hitachi ：
4192975 BRG.;ROL. Hitachi parts 218HSL, 270C LC JD, CX350DR, EX200-5Z JPN, EX270, EX270-5, EX280H-5, EX300, EX300-2, EX300-3, EX300-5, EX300-5HHE, EX300LC-5M, EX300LCLL-5, EX300LCLL-5M, EX345USR(LC), EX350H-5, EX350H-5HHE, EX350K-5
The light slewing bearing is one major model produced in our factory and its mainly used in food machinery, canning packing machinery and environmental machinery etc.
F695-2RS bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 5mm inner diameter, a 13mm outer diameter, a 4mm thickness, and an 15mm flange.
MF106ZZ bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 6mm inner diameter, a 10mm outer diameter, a 3mm thickness, and an 11.2mm flange.
