Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
6004ZZ (I.D.=20mm, O.D.=42mm, Thickness=12mm); 6004ZZ bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
MR84ZZ Miniature Shielded Bearing 4mm x 8mm x 3mm, the inner diameter is 4mm, outer diameter is 8mm and the width is 3mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
6203ZZ (17x40x12mm) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.
K9007403 bearings are used in the final drive bearing system of Doosan Heavy Machinery Equipment:
K9007403 BEARING;ANGULAR BALL Doosan parts：DX200A，DX210 / DX225LCB，DX220A / DX225LCA，DX220AF，DX225LC-3，DX225LC-3，DX225LC-5，DX230LC，DX235LC-5，DX235LCR-5，DX255LC-3，DX255LC-3，DX260LCA
6310-2RS (I.D.=50mm, O.D.=110mm, Thickness=27mm); 6310-2RS bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal: suffix Z, RS, RU or TS. TTS is used smaller ball, load rating is lower than standard.
MR128ZZ Miniature Shielded Bearing 8mm x 12mm x 3.5mm, the inner diameter is 8mm, outer diameter is 12mm and the width is 3.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
Doosan excavator final drive bearing 2109-9043
2109-9043 ANGULAR BEARING Doosan parts fit：SOLAR 280LC-III , SOLAR 290LC-V , SOLAR 290LL , SOLAR 300LC-V.
