China manufacturers of Electrical components and Electronics meet the highest standards of quality, performance and delivery. You can discover our large selection of electronic components, electrical equipments, and electrical engineering products.
Panel-Mounted PV Bulkhead Connectors Are Mainly Used In The Internal And
External Wiring Of The Photovoltaic Junction Box. Use Bulkhead Solar Connectors For Coupling And Wiring, Which Is More Convenient To Connect And Disconnect The
Circuit Of The Junction Box.
There is no need to strip the quick wire branch connector, the main wire does not need to be stripped when using, and the handle is used for quick crimping when the branch is connected.
The Lever-Type Non-Screw Terminal Block Can Withstand 250V32A Power, The
Spacing Is 5mm, And The DIP Type Is Welded On The PCB Board, Which Is Very
Suitable For Use In Switching Power Supply And Other Wiring Devices That
Require High Current And High Power Input And Output.
MC4 Branch Connectors are 2 to 1 connectors that allow for a safe and simple parallel or serial-parallel connection of PV modules. Available in either 2 female to 1 male, or 2 male to 1 female, and pluggable with single-pole MC4 connectors
Our flexible and reliable smd wire to board connectors are designed for small size mating and safe termination, and support the connection of wires to a printed circuit board (PCB).
This momentary button switch is rugged and easy to install it! Simply drill a 19mm hole into any material and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure.
Photovoltaic connectors are single-contact electrical connectors commonly used for connecting solar panels. The compatible products are universal in the solar market today, equipping almost all solar panels produced since about 2011.[citation needed] Originally rated for 600 V, newer versions are rated at 1500 V, which allows longer strings to be created.
Our flexible and reliable smd terminal block are designed for small size mating and safe termination, and support the connection of wires to a printed circuit board (PCB).
The jumper connector which used with 2060 series, it can easily connect each column of LED lights on the PCB board, which can further save you a lot of time.
One Pair Of MC4 3 To 1 T-Branch Connectors For Solar Panels. Includes Both MMMF And FFFM. Used For Parallel Connection Between Panels And Maintain The Voltage Of Your Panel Configuration.
SPL-4 wire to wire connectors are widely used in lamps lighting, motors, electrical control, power supplies, home appliances, machinery, home improvement, etc.
We are industrial battery charger manufacturers, there are different forklift battery connector types. The battery connector establishes a connection between the battery and the vehicle, only an absolutely reliable, high-quality, and durable connection device can ensure the reliable and low-loss use of electrical energy.
