China manufacturers of Electrical components and Electronics meet the highest standards of quality, performance and delivery. You can discover our large selection of electronic components, electrical equipments, and electrical engineering products.
solar pv connector are single-contact electrical connectors commonly used for connecting solar panels. The compatible products are universal in the solar market today, equipping almost all solar panels produced since about 2011.[citation needed] Originally rated for 600 V, newer versions are rated at 1500 V, which allows longer strings to be created.
The 2-In 1-Out Solar Parallel Connector Is A
Common Connector For Parallel Connection Of Photovoltaic Systems, And Can Work
Under 1.5KV Withstand Voltage.
IP68 Waterproof Cable Connector securely splices cables up to 5 conductors. Ideal for outdoor lighting systems or humid environments, this accessory has durable plastic housing and rubber gaskets to resist corrosion and seal out moisture.
The emergency stop switch is usually used in emergency situations to directly disconnect the power supply of the control circuit, so as to quickly stop the equipment to avoid abnormal operation. With a good sealing performance that can be used in harsh environments such as gas, coal dust, smoke, and moisture.
The stainless steel push button is a very tough, small, panel-mount momentary/locking switch. It is a SPDT with 16mm threading. This button is perfect for basic On/Off functions.
This push in connector is 1 in 2 out, which is different from 222 series connector. It can be combined into 2 in 4 out, 3 in 6 out, 4 in 8 out and also 5 in 10 out etc. Easy to setup.
XT30 connector, its housing is made with PA and the contact is gold plated, its shape prevents reverse polarity, and when plugged in the connection is super-solid. Advantages: low resistance, slow heating, anti-reverse insertion
The toggle switch has a short lever to manually turn the device on or off. They are usually used to activate multiple electrical contacts at the same time or to control large amounts of current.
Equivalent to amass connectors, XT90 conenctor perfect for applications up to 90A constant. It can be sold in pairs(female + male) or a single side(female or male).
M8 M12 connectors came to market in the late 1980’s and remain a positive disruption in industries such as automotive, industrial automation, agriculture, and food processing
Circular connector 4 pin are complied with the standards of component industry administration of the Ministry of electronic industry D24Q/RE008-84.
They are widely used in electrical connection between electronic equipment.
MR30 Motor to ESC connector is recommended for motor connector, 3-pin structure, gold-plated copper contacts, complete set consists of one male and one female and two protective covers
2EDGR/2EDGV has 6 different pitch: 3.5mm, 3.81mm, 5.0mm, 5.08mm, 7.5mm and 7.62mm. The contact pin has 2-24 pin, material is brass with tin plated. Both these two models can be matched with 2EDGK. Shell color is green, made by PA66.
This push in connector is 1 in 3 out, which is different from 222 series connector. It can be combined into 2 in 6 out, 3 in 9 out, 4 in 12 out and also 5 in 15 out etc. Easy to setup.
