The size of mini waterproof connector is equivalent to AA size 5 battery. It's easy to operate, can be used under water depth 4m. There are 2 pin and 3 pin.
Overview:
HPL wall system is composed of HPL sheet, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer.
iDPRT 2inch performance barcode printer iD2P features small spave-saving design, touch LDC display for easy operation and high printing speed at 8inches per second.Having multiple interfaces, such as USB HOST, Serial port, Type-B USB, Ethernet port (Standard), Wi-Fi and Bluetooth (Optional)
Inheriting the same design to the A-Type connector used in USB 2.0 application, but USB 3.0 Type A processes additional pins that are not in the USB 2.0 A Type. USB 3.0 connectors are often in blue color to help distinguish them from previous generations.
T Type Waterproof Connector Use 6-10mm diameter cable, wire size ≤14AWG (2.5mm2), screw crimping; the maximum current can support 16A. There are 3 independent wiring devices. Compared with other T-type or Y-type connectors with only one wiring device, the wiring is faster, the operation is simpler, and the contact is more reliable.
The toggle switch has a short lever to manually turn the device on or off. They are usually used to activate multiple electrical contacts at the same time or to control large amounts of current.
We provide a wide variety of battery connectors, as well as other electrical connector accessories, including battery terminal covers, battery cables/wires, etc.
The straight waterproof connector uses a 6-10mm diameter cable, can connect to a conductor of ≤14AWG or 2.5mm2, and is crimped with a terminal screw, which can withstand a maximum current of 20A, and has a wide range of applications.
Overview:
The demountable partition wall is partially used, easily removable partition system. Usually at the entrance of the equipment, the wall needs to be changed frequently.
Reinforced Surgical Gown with hand towel use in hospital and operating room , making by SMS or SMMS non woven ,then put two hand towel ,protective isolation effect for doctor.
1. Simple and elegant, with high optical mirror and sticks appearance2. Internal important parts are with metal material3. Easy paper loading, with auto cutter, full cut/partial cut optional4. 250mm/s high printing speed, rapidly change supplies, improve work efficiency5. With auto cutter, paper out alarm6. Parallel, serial, USB, Ethernet Optional multiple interfaces (supports two in one, or three in one)7. Paper end sensor, paper near end sensor (for flat)
This is a multifunctional on grid solar inverter, with dual independent MPPT solar charge controller, high frequency of 97.5%, which is perfect for on grid back up power and self-consumption applications. The wifi /GPRS module is a plug-and-play monitoring device to be installed on the inverter.With this device , users can monitor the status of the PV system from phone or from the website anywhere.
The lightweight mono PERC module is 75% lighter compared with the normal one. There is no need to fix the mounting system, the weight of the PV power station is greatly reduced. Thus without sufficient load, the PV power station can also be built in the metal sheet roof.
