Roller bearings are used in all main shaft and auxiliary drive shaft applications to support pure radial load, and allow for axial shaft elongation due to temperature changes with no additional load effect on the bearing.
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
radial clearance is
generally executed in C3 or C4;
four-row
cylindrical roller bearings for steel industry
+30years
working with steel industry
compatible
for rolling mill stands of Primetal, Danieli, SMS, etc.
widely
used in steel rolling mills
OEM
service
contact
us for stock list
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite)
professional manufacturer of bearings for
steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc.
P6 precision for higher wear-resistance
best bearing steel to ensure the bearing
can work under highest loads
radial clearance is generally executed in
C3 or C4
ready stock available
higher rolling efficiency with inner rings remained onto
the rolls during processing;
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
