Roller bearings are used in all main shaft and auxiliary drive shaft applications to support pure radial load, and allow for axial shaft elongation due to temperature changes with no additional load effect on the bearing.
particularly suitable for high speed rolling mills;
radial clearance is
generally executed in C3 or C4;
working under the toughest working environment;
LFR5208-40 ZZ ,LFR5208-40 2RS U Groove Track Roller Bearing With Inside Diameter (mm):40*Outside Diameter (mm):98*Width(mm):36,
Bearings Are Produced With Material:Chrome Steel Gcr15,We Have LFR5208 Bearing With 2678 PCS In Stock ,Free Sample Are Available .
333.375mm*469.9mm*366.712mm BT4B 328083/HA1 Four Row Tapered Roller Bearings ,produced with Chrome steel Gcr15 ,for more detialed informations ,pls contact with us .
Angular contact bearing BA260-4A(260*340*38) is used in excavator travel gearbox.
ZHZB Excavator Bearing Factory Supplier Provides High Quality BA260-4A
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite)
Angular contact bearing BD165-6A(165*210*52) is used in excavator travel gearbox.
ZHZB Excavator Bearing Factory Supplier Provides High Quality BD165-6A
Tapered Roller Bearings JP14049/10(140*195*29) is used in excavator travel gearbox.
ZHZB Excavator Bearing Factory Supplier Provides High Quality JP14049/10
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
radial clearance is
generally executed in C3 or C4;
professional manufacturer of bearings for steel mills
of billets, bars, sections, angles, beams, wire rods, coils, etc.
P6 precision for higher wear-resistance
best bearing steel to ensure the bearing can work
under highest loads
ready stock available
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
radial clearance is
generally executed in C3 or C4;
